Warning! disconnect input power before maintaining, Fabricator 281 – Tweco 281 Thermal Arc Fabricator User Manual
Page 60
Advertising
FABRICATOR 281
5-2
April 10, 2006
Warning!
Disconnect input power before maintaining.
Each Use
Visual check of
regulator and pressure
Visual check of torch
Consumable parts
Weekly
Visually inspect the torch
body and consumables
Visually inspect the cables and leads. Replace as needed.
3 Months
6 Months
Replace all
broken parts
Visually check and use a vacuum to carefully clean the interior
Maintain more often
if used under severe
conditions
Gas and
air lines
Art # A-07464
Clean exterior of both units
Advertising