1 quick setup, Quick setup – Unitec EZ Trak User Manual
Page 15
E Z T R A K
Document Number:
EZT1001
11
Document Title:
EZ Trak Installation and Operations Manual
3.1 Quick Setup
To access the EZ Trak main menu, connect the Ethernet port to you PC network hub
or router the
web browser address.
1.
Login to the Main Menu using the Master login User Name: NADA and
Password: UE.
2.
Login to the Password Administration Menu using the Master login. Enter all
screen user names and passwords. Check the box and click Submit.
3.
Login to the Admin Menu. Enter the current date and time, check Set Current
Time then click Submit. Select all boxes under Reset System Counters then
click Submit. Return to the Main Menu.
4.
Login to the One Use Codes Menu. Select Generate New One-Time-Use
Codes then click Submit. Print the One Use Codes page (using computer
print commands) for reference. Select Clear All One-Time-Use Codes but
keep the sheet for setting up pin numbers. Return to the Main Menu.
5.
Login to the Account Setup-Change menu. Select the number of accounts
you would like to add. Enter the Account name. Enter the Department. Enter
the number of Remaining Washes. Enter the card and/or keypad codes.
Select the Key/Card Status from the drop-down menu. Click Submit.
The EZ Trak system is now ready to operate. Test the accounts you entered by swiping a
programmed card or entering a code. Be sure the wash is fired.