VICI D-4-I-SH14-R - Manual (Page 7)

3
Components of the Detector System
Components of the detector system are listed in the Table 1. Check the
contents of the packages to verify that everything is present. Contact the
factory if anything is missing or damaged. (NOTE: damaged shipments
must remain with the original packaging for freight company inspection.)
Table 2 lists additional required items which must be purchased from
Shimadzu.
Introduction
Description Quantity Product number
Detector cell, PDHID 1 PD-D4-I-RU
Pulse supply module 1 PD-M2
Instruction manual 1 MAN-PDD4-SH14
Fittings kit 1 PD-KIT-D4
Includes: 1/32" polyimide ferrule 5 ZF.5V
1/32" polyimide plug ferrule (no through hole) 1 ZF.5VX
1/16" gold-plated ferrule 5 ZF1GP
0.25 - 0.44 mm polyimide column ferrule 5 FS.4
0.4 - 0.5 mm polyimide column ferrule 5 FS.5
1/16" union, 316 SS 2 ZU1MS6
1/16" tee 1 ZT1
1/8" external to 1/16" internal adapter 2 EZR21
1/8" external to 1/16" internal reducing union 2 EZRU21
1/32" external nut 1 EN.5KN
Fused silica adapter (installed) 1 IZERA1.5
Packed column adapter 1 I-23642-D4RU
Restrictor, 30 cc/min @ 60 psi He 1 TGA-R-30F60P
Helium purifier 1 HP2
Electrometer cable assembly, Shimadzu 1 I-23230-SH14
Bias cable assembly, Shimadzu 1 I-23404-SH14
Pulser power supply 1 I-23569-I
Heater block, Shimadzu GC14 1 I-23911
Cover plate, Shimadzu GC14 1 I-23823
Table 1: Components of the D-4-I-SH14-R system
Description Quantity Product number
Electrometer, FID GC14 1 221-36965-91
Table 2: Components not supplied by Valco (may be obtained from Shimadzu)