Walker's Game Ear Power Muffs Digital Quads User Manual

Pm digital quads, Owner’s manual, Replacing the battery

Advertising
background image

Most Comfortable Fit

Additional hinge point allows

muffs to move as the head moves

Adjustable, Padded Headband

Independent Volume Controls

Allow for true stereo sound

*Red on right ear, Blue on left.

Concave Cheek Relief

Won’t interfere when shouldering a gun

Battery Compartment

Located beneath foam

(Size AAA)

Wind-Resistant,

High-Frequency Microphone

Makes it easy to identify sounds

and direction

Adjustable Frequency Tuning

Tune-in specific sound frequencies

Special Butyl Rubber Ear Pads

Stays soft and pliable

Maintains the perfect acoustic seal

Replacing The Battery

The battery compartments are located under the padding on the inside of each ear
cup. The padding is cut for easy access. Remove the battery from compartment and
replace with a new Size AAA Alkaline battery. Note the direction of the positive (+)
and negative (-) polls.

Adjusting the Headband

PM DIGITAL QUADS come with independent headband and ear muffs adjustments.
Size the PM Digital Quads to comfortably fit your head by sliding the ear cups in or
out of the headband. The ear cups should fit comfortably, completely surrounding
your ear to get the perfect acoustic seal.

Identifying Muff Components

Peel back upper foam piece

Battery Compartment

Size AAA Alkaline Battery

Padded foam liner

Adjusting the AFT

The adjustable Frequency Tuning (AFT) knob is located directly behind the volume
control. The AFT dial operates independently from the volume control and enables
the user to adjust the sound frequencies to his/her individual levels.

1. Place the Walker's PM Digital

Quads™ on your head, with red

volume control on right ear and

the blue volume control on left

ear, adjust the padded

headband to create a

comfortable fit.

2. Turn on the power to your PM

Digital Quads™ and adjust the

volume to a comfortable level.

3. To increase the higher

frequency sounds in your right

ear, rotate the AFT control

forward (toward your nose).

4. To increase the higher

frequency sounds in your left

ear, rotate the AFT control

backward (toward the back of

your head).

That's it! A custom adjustment
any time, every time. No matter
where you are or how you are
using your PM Digital Quads™,
with the improved AFT control,
you're sure to have the custom
sound that meets your needs.

Increases Hearing

• Up to nine times with 50 dB of power for the highest rating

in the industry.

Protects Hearing

• Sound Activated Compression (SAC) circuit helps protect hearing from

harmful loud sounds, by reducing the amplification of those sounds

to a safe level. Noise Reduction Rating (NRR) of 24 dB is among the

highest in the industry.

Digital Signal Processing (DSP)

• This muff offers two-channel digital circuitry capable of processing

millions of calculations per second providing unsurpassed sound

quality and speech clarity that only digital technology can produce.

Adjustable Frequency Tuning (AFT)

• Two independent AFT controls allow the user to focus on specific sound

frequencies for crystal-clear reception in any situation. The AFT control

allows the user to fine tune the bass/treble balance.

OWNER’S MANUAL

PM DIGITAL QUADS

Toll-free customer support 877-269-8490

www.walkersgameear.com

Advertising