LaMotte AM-21 Water Pollution Detection Outfit User Manual
Page 44
Field Test Method
Quantity
Contents
Code
15 mL
*Sulfide Reagent A
*4458-E
15 mL
Sulfide Reagent B
4459-E
30 mL
Sulfide Reagent C
4460-G
1
Test Tube, 5.0 mL
0230
1
Pipet, 1.0 mL
0354
1
Sulfide Comparator, 0.2 and 2.0 ppm
7477
WARNING: Reagents marked with a * are considered to be potential health hazards.
To view or print a Material Safety Data Sheet (MSDS) for these reagents see MSDS CD
or www.lamotte.com. To obtain a printed copy, contact LaMotte by email, phone or fax.
Procedure
1.
Fill test tube (0230) to the 5 mL line with sample water.
2.
Add 15 drops of *Sulfide Reagent A (4458). Cap and mix. Remember
that the test sample now has a high acid content.
3.
Add three drops of Sulfide Reagent B (4459). Cap and mix. Wait one
minute.
4.
Use the 1.0 mL pipet (0354) to add 1.0 mL of Sulfide Reagent C (4460).
Cap and mix.
5.
If sulfide is present, a blue color will develop. Insert the test tube into the
Sulfide Comparator (7477). Match sample color to a color standard.
44