Quoizel DW8701C Downtown - Manual

FIXTURE SUPPLY WIRE
and GROUND WIRE
OUTLET BOX
(2) MOUNTING SCREWS
(2) OUTLET
BOX SCREWS
(not supplied)
UNIVERSAL
CROSSBAR
BACKPLATE
(2)MOUNTING BALLS
SHADE
SOCKET COLLAR
STEEL COLLAR
SOCKET
1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.
2 Turn the electrical power to installation point OFF at circuit breaker
3
4. :
Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE
WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK
(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap
each connection with approved electrical tape.
5. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and
position the fixture over the outlet box. Align the HOLES in the
BACKPLATE with the 2 MOUNTING SCREWS attached to the
UNIVERSAL CROSSBAR. Pass the fixture over the 2 MOUNTING
SCREWS and secure against by threading 2 MOUNTING BALLS
onto end of screw. Tighten until snug.
6. Position the SOCKET through the hole on the bottom of the SHADE.
Locate the STEEL COLLAR over the SOCKET and thread the
SOCKET COLLAR onto the SOCKET to secure them Hand tighten
until snug.
7. Install the correct bulb referring to the fixture markings and/or labels for
maximum wattage.
8 Restore power to the installation point ON. Retain this sheet for future
reference.
. .
( )
( )
( )
.
,
.
;
.
Place the CROSSBAR on the BACKPLATE and align the holes in the
BACKPLATE with a set of threaded holes in the CROSSBAR. Install the
(2) MOUNTING SCREWS in the aligned threaded holes on the
CROSSBAR. Next, mount the CROSSBAR to the outlet box with (2)
OUTLET BOX SCREWS (not provided).
Make the connections
INSTALLATION INSTRUCTIONS
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS DW8701
2007-09 01 -
-
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .