Quoizel DH8604AN Duchess - Manual

FIXTURE SUPPLY WIRE
and GROUND WIRE
OUTLET BOX
(2) MOUNTING SCREWS
(2) OUTLET BOX
SCREWS(not supplied)
UNIVERSAL
CROSSBAR
BACKPLATE
( ) 2 MOUNTING BALLS
SOCKET COLLAR
TOOL supplied)
(
SOCKET COLLAR
SHADE
SOCKET
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
INSTALLATION INSTRUCTIONS
IS DH8601
Revised 2007-01-16
-
1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.
2 Turn the electrical power to installation point OFF at circuit breaker
3 Place the CROSSBAR on the BACKPLATE and align the holes in the
BACKPLATE with a set of threaded holes in the CROSSBAR. Install the
(2) MOUNTING SCREWS in the aligned threaded holes on the
CROSSBAR. Next, mount the CROSSBAR to the outlet box with (2)
OUTLET BOX SCREWS (not provided).
4. :
Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE
WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK
(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap
each connection with approved electrical tape.
5. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and
position the fixture over the outlet box. Align the HOLES in the
BACKPLATE with the 2 MOUNTING SCREWS attached to the
UNIVERSAL CROSSBAR. Pass the fixture over the 2 MOUNTING
SCREWS and secure against by threading 2 MOUNTING BALLS
onto the end of the screw. Tighten until snug.
6. Position the SHADE over the SOCKET as shown. Use SOCKET COLLAR
TOOL(supplied), thread SOCKET COLLAR onto the SOCKET and hand tighten
until snug to secure the SHADE.
7.Install bulb(s) referring to fixture markings and/or labels for maximum
wattage.
8 Restore power to the installation point ON. Retain this sheet for future
reference.
. .
( )
( )
( )
.
,
.
;
Make the connections