Quoizel QI8604C Quinton - Manual

FIXTURE SUPPLY WIRE
and GROUND WIRE
BACKPLATE
CROSSBAR
( 2)MOUNTING SCREWS
SOCKET
SHADE
STEEL COLLAR SOCKET COLLAR
SOCKET COLLAR
TOOL (supplied)
SHADE SHIELD
INSTALLATION INSTRUCTIONS
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS QI8601
Revised 2009-04-28
-
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
( )
( )
2 OUTLET BOX
SCREWS not supplied
OUTLET BOX
BULB supplied ( )
1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.
2 Turn the electrical power to installation point OFF at circuit breaker
3 Place the CROSSBAR on the BACKPLATE and align the holes in the
BACKPLATE with a set of slots in the CROSSBAR. Mount the CROSSBAR
to the outlet box with (2) OUTLET BOX SCREWS (not provided).
4. :
Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE
WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK (or
RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap each
connection with approved electrical tape.
5. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and
position the fixture over the outlet box. Align the HOLES on the edge of the
BACKPLATE with the 2
mounting holes on the folded edge of the
CROSSBAR. Use screw driver, thread the (2)MOUNTING SCREWS into the
mounting holes on the folded edge of the CROSSBAR. Hand tighten until
snug to secure the BACKPLATE.
6. Position the SHADE and the STEEL COLLAR over the SOCKET as
shown. Using the SOCKET COLLAR TOOL(supplied), thread the SOCKET
COLLAR onto the SOCKET. Hand tighten until snug.
7. Install the correct bulb s referring to the fixture markings and/or labels
for maximum wattage. Proceed to thread the SHADE SHIELD onto the
SOCKET
8 Restore power to the installation point ON. Retain this sheet for future
reference.
,
.
;
( )
.
. .
( )
.
Make the connections