Cobra Electronics Mrf 80b - Manual (Page 44)

Introduction
Nothing comes close to a Cobra ®
Setup Mode Programming
41
Setup Mode Programming
•
Setup Menu
Use the Setup menu in the CobraMarine VHF radio to turn On
and Off many features, to adjust feature preferences and enter
a user MMSI number.
NOTE
Basic Setup menu programming is described in this
section. For Setup menu programming that applies to
a specific function refer to that section in this manual.
For example, MMSI information is in the DSC portion
of the manual.
Basic Scrolling in the Setup Menus:
The Channel Select knob on the radio can be used to scroll
through different menus and confirm selections chosen by the
user. Alternately, scrolling selection functions can be made
from the microphone by using the Channel Up/Down or
Function (F1/F2) button.
To Enter the Setup Menu:
Press and hold the Call/Setup button. The Setup menu
appears on the LCD. Scroll up or down through the Setup
menu until the desired function to program is positioned to
the right of the selection arrow.
To Exit any Setup Menu:
Scroll down to “EXIT” at the bottom of the menu. With the
arrow pointing toward “EXIT,” press the Enter button to return
the radio to the Standby mode.
NOTE
The ESC button on the radio (and the Function F1/F2
button on the microphone) can also be used
universally to return to the Standby mode.
Call/Setup Button
Mic Function Buttons
Mic Channel Buttons
Exit
Enter Button
Setup Menu
SELECT
MEM
Channel Knob
F80 Installation.qxp:QXP-1058720374.qxp 12/29/06 10:03 AM Page 41