Cobra Electronics Mrf 80b - Manual (Page 78)

Introduction
Nothing Comes Close to a Cobra ®
Product Features
75
Digital Select Calling (DSC)
Operation
Call Log and Distress Log
Call Waiting functions similarly to the Caller ID function on
your telephone. It will capture the caller’s MMSI
identification number and any other data included in a DSC
message.
NOTE
Each Call Log memory can hold up to 10 messages.
Once the memory becomes full, each new call will erase
the oldest call information on a first-in, first-out basis.
To Review Log Messages Received While in DSC Standby
Mode:
1. From Standby mode, press the Call button to enter the
Call menu.
2. Turn the Channel knob, or press the microphone Channel
Up/Down buttons to scroll to CALL LOG or DIST LOG
menu.
3. Press the Enter button to enter either LOG menu.
4. Turn the Channel knob, or press the microphone Channel
Up/Down buttons to move from message to message in
the Call Log memory.
5. Press the ESC button to return to the Call Menu.
To Clear Messages From The Log Memory:
1. Follow steps 1-3 above to enter the desired LOG.
2. Turn the Channel knob, or press the microphone Channel
Up/Down buttons to select the message you want to
delete.
3. Press the F2 button under the screen to delete the
selected message.
Repeat steps 4 through 5 to delete additional messages.
4. Press the Enter button to return to the Call Menu.
Operating Your Radio
All Messages Viewed
Call Log Menu
Unread Messages
8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:04 AM Page 75