Cobra Electronics Mrf 80b - Manual (Page 62)

1. Enter the Setup menu and scroll to USERMMSI menu.
2. Press the Enter button. A blinking cursor displays at the
first digit under USERMMSI ID ENTRY.
3. Rotate the Channel knob to scroll through the number list
to the digit of the MMSI number being entered.
4. Press the F1 and F2 Function buttons to select the digit.
The blinking cursor moves to the next digit of the number.
5. Repeat steps 3 and 4 until all nine (9) digits of the MMSI
number are entered.
NOTE
Press the F1 Function button to backspace and the
F2 Function button to space forward. A new entry
does not automatically erase previous entries.
6. Check that the number is entered correctly.
7. Press the Enter button to return to the Setup menu.
If an MMSI Number is entered incorrectly, repeat steps 1
through 7 until correct. Remember, you only have one
attempt to reset the MMSI number or the radio must be
returned to Cobra Electronics for reset. See Product Service
on page 79 for details on how to return your radio.
Transferring a Radio to a Different Vessel
Contact the agency that issued the MMSI number to change
the vessel information associated with your MMSI number.
To View the Programmed MMSI Number at Any Time:
1. Enter the Setup menu and scroll to USERMMSI.
2. Press the Enter button and the MMSI number will appear.
3. Press the Enter button to return to the Setup menu.
Introduction
Nothing Comes Close to a Cobra ®
Product Features
59
Digital Select Calling (DSC)
Setup
Operating Your Radio
USERMMSI Menu
USERMMSI ID Entry
MMSI Entry Error Message
USERMMSI Menu
USERMMSI ID Entry
MMSI Final Change
8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:03 AM Page 59