ClearOne MUR2EM Installation Guide - Manual (Page 10)

Musica MUR2EM
2-4 NS-1005-7140
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
4. In the Connect Using field, enter the COM port you want to use (this will normally
be COM1).
5. Select OK.
The COM Properties window displays (see Figure 2-4).
Figure 2-4 COM Properties window
6. Enter the following settings:
ˆ Bits Per Second: 9600
ˆ Data Bits: 8
ˆ Parity: None
ˆ Stop Bits: 1
ˆ Flow Control: None
7. Select OK.
A blank HyperTerminal screen displays (see Figure 2-5).