ClearOne MUR2EM Installation Guide User Manual
Page 15
Advertising
Connecting Multiple MUR2EMs
NS-1005-7140
3-3
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
To configure the IP addresses of your MUR2EMs, complete the following steps:
1.
Select Start>All Programs>Accessories>Communications>HyperTerminal.
The HyperTerminal screen displays (see Figure 3-2).
Figure 3-2
HyperTerminal screen
2.
In the Connection Description dialog box, enter MUR2EM in the Name field.
3.
Select OK.
The Connect To dialog box displays (see Figure 3-3).
Figure 3-3
Connect To dialog box
Advertising