Configuring a single mur2em, Hardware requirements – ClearOne MUR2EM Installation Guide User Manual
Page 7
NS-1005-7140
2-1
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
Chapter
2
Configuring a Single MUR2EM
This chapter shows you how to connect and address the MUR2EM hardware.
The MUR2EM connects to the Musica MU5066ADC. It allows the home owner to
control the Musica system through a Flash-enabled web browser (see Figure 2-1).
Figure 2-1
Connecting the MUR2EM to the ADC
Hardware Requirements
To complete an installation for a single MUR2EM, you will need:
an MUR2EM. Part Number: NS-MUR2EM,
a NetStreams Musica MU5066 Audio Distribution Center
®
(ADC).
Part Number: NS-MU5066ADC,
a hub/switch,