Great Plains S3T - Manual

550-487M 12/22/2011
1 S3T & Reel Great Plains Manufacturing, Inc.
S3T & Reel Update
Using This Manual
This manual was written to help you assemble and pre-
pare the new finishing attachment. The manual includes
instructions for assembly and setup. Read this manual
and follow the recommendations for safe, efficient and
proper assembly and setup.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of: Up,
Back, Left, Down, Front, Right
FigureSpacer:
Figure 1
Right / Left
42091
R
L
U
D
F
B
L
R