Great Plains Seed-Lok - Manual

1
Installation Instructions
Great Plains Mfg., Inc.
© Copyright 1999 Printed 6/22/99
Used with:
•
•
404-090M
Row Unit 1999
Seed-Lok Option
RU99
SRU99
General Information
These instructions explain how to install the Seed-Lok. The
Seed-Lok wheels mount on the row-unit bodies and firm seeds
into the seedbed for more even plant emergence.
These instructions apply to:
404-093K Seed Lok 99 Row Unit
Manual Update
Refer to the drill operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and maintaining the
Seed-Lok. Refer to the parts manual for part identification.
• PT1230 Operator’s Manual . . . . . . . . . . . . . . . . 401-069M-B
• PT6030 and PT8030 Operator’s Manual . . . . . . 401-032M-B
• 60303P and 80303P Operator’s Manual . . . . . . 401-008M-A
• RU1999 and SRU1999 Parts Manual. . . . . . . . . . . 404-086P
Before You Start
Page 4 is a detailed listing of parts included in the Seed-Lok
package. Use this list to inventory parts received.
Assembly Instructions
To install Seed-Lok on one row unit:
1. Remove side-depth wheels from row unit
by loosening and removing pivot bolt on
wheel arm (1).
2. Remove one disk (2) from the row unit.
NOTE: Notice how many shim washers are
used on the disk. You must replace the disk
with the same number of shim washer.
3. Remove bolts (3) holding disk scrapers
on row-unit body.
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
18100
1
2
3