Reel following s3t – Great Plains S3T User Manual
Page 6
6
S3T & Reel
Great Plains Manufacturing, Inc.
550-487M
12/22/2011
Reel Following S3T
Slide spring
over tube of reel arm assembly
.
Align other end of spring
to tube on front plate of
arm assembly
and let the rest of the reel arm
assembly
rest on the pad towards rear of arm
assembly
.
2.
Secure reel arm assembly
to arm assembly
with
3/4 x 4 hex bolt
and 3/4 top lock nut. Tighten top
lock nut snug but do not torque as arm needs to
pivot.
Note: Adjust nut
on reel arm assembly
snug to hold
spring on round tube on front plate of arm assem-
bly
. When rest of drag is installed, set the pre-
load pressure on spring, See “5-Section Fold
Catch Assembly” on page 8.
Note: See Layout drawings pages 8-16 for proper reel
placements.
3.
Attach reel assemblies
to rear plates of reel arm
assembly
with 3/4 x 4 1/32 x 4 1/2 u-bolts
, 3/4
lock washers and 3/4 nuts.
4.
All u-bolts may be tightened to specs, See “Torque
Values Chart” on page 22.
1
2
1
3
2
3
2
3
4
5
3
3
6
2
7