Proximity sensor adjustment – Great Plains 3000TM User Manual
Page 2
Advertising
Great Plains Manufacturing, Inc.
2
03/06/2013
586-543M
Proximity Sensor Adjustment
Refer to Figure 2
Note: Wings need to be folded up when adjusting the
proximity sensor
to prevent damage to sensor
and bracket. Be sure and adjust proximity sensors
before unfolding. Be sure wing safety lock pins are
installed
6.
Loosen nuts
(one on front and one on back side of
sensor bracket, adjust the proximity sensor
to 1/8”
to 1/4”, from front of proximity sensor
to rear of
wing tube
as shown.
7.
Re-tighten nuts
to secure proximity sensor
.
1
2
1
3
4
2
1
Null4:
Figure 2
Priority Sensor Adjustment
43015
2
4
3
1
Advertising