Great Plains Electro-Hydraulic Control Option Great Plains 3-Point Sprayers - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2008 Printed 06/09/2008 506-605M
Electro-Hydraulic Control Option
Great Plains 3-Point Sprayers
Used with:
• CF500 Cross-Fold Boom
• CF600 Cross-Fold Boom
General Information
These instructions explain how to install the Electro-
Hydraulic Control Option. The electric-hydraulic control
supports powering the boom folding and elevator lift on
the same hydraulic circuit, and control via cab switches.
These instructions apply to an installation of:
Manual Update
Refer to the CF500 and CF600 Operator manual for
detailed information on safely operating, adjusting, trou-
bleshooting and maintaining the electric-hydraulic control
option. Refer to the parts manual for part identification.
Before You Start
Part lists are on page 7. Inventory parts received before
installing.
Tools Required
• basic hand tools
• small amount of hydraulic fluid
Kit Product Description
506-584A ELEC/HYD KIT JOY STICK
506-585A ELEC/HYD KIT SWITCH BOX
Kit Product Description
506-582M CF500 and CF600 Operator’s Manual
506-582P CF500 and CF600 Parts Manual
Notations and Conventions
“Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of: Up, Back, Left,
Down, Front, Right.
to callouts identify components in the currently
referenced Figure or Figures.
to callouts reference new parts from the list on
page 7, and are consistent across all pages.
Descriptions match the current Parts Manual.
!
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life
and the lives of others depend on it!
Figure 1
506-584A Joystick Kit
28169
Figure 2
506-585A Switchbox Kit
28170
U
D
L
R
B
F
1 9
11 27