Great Plains IntelliAg Harness Pinouts - Manual (Page 23)

Actuator Harness - 467980160
Feedback 1-4 PWM 1-4
Servo 1-2
Test Switch
RPM 1 Hopper
Ground
Speed
Lift Switch
Pin Actuator Conn.
Main Conn.
Color &
Wire ID Goes To
1 Solenoid Ground Black - 1005 Servo 1-2, Pin B
2 Solenoid Power. Red - 1005 PWM 1-4, Pin A
Servo 1-2, Pin A
3 Sensor Power. Red - 1003 Hopper Sensor 1
4 PWM 1 Gray/Black - 1017 PWM1, Pin A
5 PWM 2 Brown/White - 1016 PWM2, Pin B
6 PWM 3 Pink/Black - 1015 PWM3, Pin B
7 Servo 1 (Relay 1) Dark Green - 1013 Servo1, Pin B
8 Servo 1 (Relay 2) Yellow - 1014 Servo1, Pin D
9 Servo 2 (Relay 3) Brown - 1011 Servo2, Pin C
10 Servo 2 (Relay 4) White - 1012 Servo2, Pin D
11 PWM 4 Dark Green/Red - 1006 PWM4, Pin B
12 FB (Feed Back) 1 Black/Green - 1018 FB 1, Pin C
13 FB (Feed Back) 2 Black/Yellow – 1019 FB 2, Pin C
14 FB (Feed Back) 3 White/Lt Green - 1020 FB 3, Pin C
15 RPM 1 Signal Red/Green - 1010 RPM 1, Pin C
16 Hopper 1 Signal Light Green/Black - 1009 Hopper Sensor 3
17 Ground Speed Signal Light Blue – 1008 Radar Conn. , Pin 2
18 FB (Feed Back) 4 Dark Blue - 1007 FB 4, Pin C
19 ECU Power. Red - 1002 Sensor/switch power
20 ECU Ground Black - 1001 Sensor/switch grnd.
21 Implement Lift Switch Orange/Black - 1021 Lift Switch 2
22 Not used
23 Not used
24 Not used
Main Connector
Main
Connector
23 3/12/2012