Great Plains EWF13 13-Foot End Wheel Vintage Drills - Manual (Page 11)

-
9 4/9/04 Great Plains Mfg., Inc.
Section 5 Troubleshooting
13’ End Wheel Drill Single/Dual Hydraulic Marker 113-530M
Section 5
Troubleshooting
Problem Solution
Hydraulic marker functioning
improperly Check all hose fittings and connections for air and oil leaks.
Check tractor hydraulic oil level.
Check all bolts and fasteners.
If needle valve is plugged; open valve, cycle markers, and reset the needle valve.
Blade does not mark The maximum marker down float is limited by the slot in the pivot link. If the blade does
not drop down to follow depressions in the field, make sure the marker cylinder is fully
extended.
The blade may be reversed to pull dirt in or throw dirt out depending on soil conditions.