Great Plains DICKEY-john AI-100 - Manual (Page 10)

Once you have blackened in Ch. 2 box
you may now touch the area shown
here.
This will take you to the Channel
Setup screen.
Zeroing the pressure in the split air is
recommended throughout the day due
to barometric pressure changes.
This is done by touching the area
shown here. Fan must be off to enable
pressure reset.
Once you have zeroed out your Split-Air,
now return to your “Home screen” or
“Work screen” by touching the WORK
SCRN button.
Notice: This will take you to the
Work Screen
2012-12 10 401-908M