ADS Environmental Services Spider QR 775010 A0 - Manual (Page 68)

ADS Environmental Services ADS Spider User Manual
Page 66
Transmitted alarm text messages have the following format:
Location: Text Message content (Send
‘
RST Alx
’
to reset)
Where,
“
Location
”
is the programmed Spider location
“
Text Message content
”
is the programmed text message content
for this particular alarm
“
x
”
is the particular alarm number (1
–
8)
Therefore, using the examples programmed in Setting up a Spider for
the First Time on page 32, the first alarm text message will be sent to
2564303366 and will be:
ADS DEMO: Pump 1 has failed (Send
‘
RST AL1
’
to reset)
The alarm sequence may be reset simply by replying with the
received message (no text entry required!!), replying with RST AL1,
or by connecting to the Spider with a PC and resetting the alarm.
NOTE: Alarms will be registered while in the Remote Access mode,
but text messages will not be sent until Remote Access mode
terminates.