Cpu mount – Amico Falcon Combo Arm User Manual
Page 13
www.amico.com 13
CPU Mount
WARNING
Ensure CPU is within weight and size rating of the CPU mount. If not, please contact Amico
Accessories at (1-877-264-2697)
WARNING
After the Mounting Adapters are installed, ensure that the lever on the Mounting Adapters are
pressed in as far as possible.
WARNING
The CPU mount can be mounted anywhere at any height on the rail. However, DO NOT mount
anywhere above a patient’s head.
WARNING
Ensure rail is stable and properly installed before mounting FIT Station.
1. Determine a suitable location on your ARS for the CPU mount, making sure it isn’t above the patient’s head.
2. Guide the CPU mount into the ARS rail, pull the lever back against the Mounting Adapter and push the CPU
mount into the channel. Release the lever when you reach the desired location. (Figure 2)
(Figure 1)
Thumb
knobs
ARS
Adapter
ARS
CPU
mount
CPU slides
into slot
ARS Adapter
tab on ARS
ARS Rail
(Figure 2)
SECTION 2: Installation on Rail Systems