Amico Falcon Combo Arm - Manual (Page 34)

34 Amico Accessories Inc.
Rotation
WARNING For FIT Station with extension arms, both arms have a 180 degree rotation. Ensure proper
clearance around the arm(s) to avoid collision.
NOTE: If the arm becomes difficult to rotate, or too loose, please contact Amico Accessories:
1-877-264-2697
NOTE: Adjusting the rotational tension of the extension arms can be done by loosening or tightening
the bolt at the joints of the arms and the adapter (Figure 1) using a 3/4” socket wrench or equivalent tool. Be
careful not to overloosen.
Single Arm Rotation: To rotate the AHM, simply push on the side of the AHM in the direction desired.
Extension Arm Rotation: To rotate the extension arm (near wall), push on the side of the extension arm, near the
mid-way point (Figure 1). To rotate the AHM, hold the extension arm with one hand and push on the side of the AHM
with the mounted monitor (Figure 2).
(Figure 2)
To rotate AHM:
Second Arm rotated
(Figure 1)
Extension Arm rotated
Bolt at extension arm
Bolt at
adapter
AHM extension arm
SECTION 4: Adjustments