Amico Falcon Combo Arm - Manual (Page 4)

4 Amico Accessories Inc.
SECTION 1: Installation Preparation
Installation Tools Requirements
The following table lists all the tools and parts required for installation
Item Item number Qty
Phillips screw driver #2 A1 1
HEX keys (1/8” (0.3175cm), 3/16”
(0.47625cm), M3, M4)
A2 1 each
Socket wrenches (12 mm (1.2cm), ½”
(0.05cm))
A3 1 each
Adjustable wrench A4 1
NOTE: Amico does not provide any monitor hardware, nor the tools necessary for assembly.
A
1
2
3
4