Wall mounting instructions, Figure 2 – Amico Dome Loaded Manifold Nema-4 NFPA User Manual
Page 14
Advertising
14
Amico Pipeline
4.
Hang the manifold control panel on the mounting bracket. The top two control panel mounting bolts will slide
into slots of the bracket. The bottom of the manifold control panel should be angled away from the bracket until
the top two bolts have been inserted as shown in fi gure 2.
NOTE:
A bracket mounting height of 61 1/2” [1,562.1 mm] from the fi nished fl oor to the bottom hole on the support bracket
allows for adequate clearance beneath the manifold when utilizing standard “H” size or slightly taller cylinders.
Figure 2
Wall Mounting Instructions
Advertising