Wall mounting instructions, Figure 3 – Amico Dome Loaded Manifold Nema-4 NFPA User Manual
Page 15
Advertising
![background image](/manuals/599819/15/background.png)
www.amico.com
15
WARNING: Do not attempt to lift manifold alone. Two people are
recommended in order to hang manifold onto wall mounting bracket
CAUTION: Do not use thread sealant on header or pigtail connections.
CAUTION: Each header segment must be supported by a header
bracket before additional header segment are added.
Figure 3
The bottom of the control panel can then be positioned, so that the holes at the bottom of the panel align with the holes
in the hanging bracket. Use 3/8” [9.525 mm] bolts to secure the cabinet to the bracket as shown in Figure 3.
Wall Mounting Instructions
Advertising