B&G Zeus2 Glass Helm CPU - Manual (Page 17)

CZone dashboard
When the CZone is installed and configured, an additional CZone dashboard will be added
to the Instrument panels.
You switch between a panel’s dashboards by selecting the left and right arrow symbols or by
selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for each of the gauges.
Available editing options depend on the type of gauge and which data sources that are
connected to your system.
For more information refer to "Instrument panels" on page 88.
GoFree TM wireless
With a WIFI-1 unit connected to the Zeus 2 Glass Helm system you can use a wireless device
to remotely control the system. The system is controlled from the wireless device by Apps
downloaded from their relevant Application store.
Ú Note: For security reasons, Autopilot and CZone functions cannot be controlled from a
wireless device.
Installation and wiring of the WIFI-1 unit are described in the separate WIFI-1 Installation
Guide. Configuration and setup are described in the Zeus
2 Glass Helm Installation manual.
Operating the system with a wireless device
When remote control is accepted, the active page will be mirrored to the wireless device.
The image on the wireless device includes softkeys used for operating the Zeus
2 Glass Helm
system.
H5000 integration
The Zeus 2 Glass Helm integrates with B&G’s H5000 Instrument and Autopilot system.
The H5000 icon will be available in the Tools panel on the Home page when an H5000
system is available on the network.
A separate manual is provided with the H5000 system. Refer to this documentation and to
the Zeus
2 Glass Helm Installation manual for how to install and configure the H5000 system.
Introduction | Zeus 2 Glass Helm 17