Bio-Rad Mini-PROTEAN® 3 Dodeca™ Cell - Manual (Page 6)

2.3 Assembly
a. Set the clamping frame to the open position.
b. Place gel sandwich or gel cassette into the clamping frame with the Mini-PROTEAN 3
short plates facing inward. Note: the clamping frame requires 2 gels to create the clamp
assembly. If an odd number of gels are being run, use the buffer dam.
c. Lift the gel sandwiches or cassettes into place against the green gaskets. Make sure the
Mini-PROTEAN 3 short plates sit just below the notch in the gasket.
4