Vertical Communications SCS 8324S - Manual (Page 50)

Making Calls
40 Comdial August, 03
• To activate call waiting when you hear a busy signal,
1. 1.
1. DIAL *6 (called party hears tone).
2. WAIT on line for reply.
3. Called party can place the current call on hold or disconnect from the
call to answer your call-waiting tone, or choose to ignore your call-
waiting tone and continue current conversation.
• To cancel call waiting,
1. PRESS INTERCOM AND DIAL #6.
2. HANG UP OR PRESS SPEAKER to end.
• To answer a call-waiting tone if you receive one while
on a call,
1. HEAR short tone burst in receiver.
2. PLACE current call on hold, OR complete call AND HANG UP
(waiting call will ring at your telephone).
3. LIFT handset to answer call.
1 2 3 4 5 6 7 8 9 0 * #
Your
Station
Idle
Station
Busy
Station
To Wait For
Callback...
...Select
CALLBACK
and Disconnect
To Send Call
Waiting Tone...
...Dial 6 and
Wait For Reply
✳
To Wait For
Callback...
...Select CAMP
and Disconnect
When idle,
your call
is connected.
Busy station
hears tone
and may respond
or ignore.
When any activity
occurs at station,
your call is
connected.
BUSY
NO ANSWER
Camping On Options