Vertical Communications SCS 8324S - Manual (Page 86)

Programming
76 Comdial August, 03
• To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. PRESS INTERCOM.
2. DIAL **6.
3. PRESS programmable button for RESPONSE MESSAGE button
location.
4. DIAL message number (01-30) from list of messages.
5. DIAL # to save programming.
6. PRESS SPEAKER to end.
7. LABEL button location.
Note: Programmed messages available for use are created by the
system attendant and listed in a table on page 60.