Bio-Rad Model 422 Electro-Eluter - Manual (Page 2)

Note
To insure best performance from the Model 422 Electro-Eluter, become fully acquaint-
ed with these operating instructions before using the cell to separate samples. Bio-Rad rec-
ommends that you first read these instructions carefully. Then assemble and disassemble the
cell completely without casting a gel. After these preliminary steps, you should be ready to cast
and run a gel.
Bio-Rad also recommends that all Model 422 Electro-Eluter components and accessories
be cleaned with a suitable laboratory cleaner (such as Bio-Rad Cleaning Concentrate, catalog
number 161-0722) and rinsed thoroughly with distilled water, before use.
Warranty
Bio-Rad Laboratories warrants the Model 422 Electro-Eluter against defects in materials
and workmanship for 1 year. If any defects occur in the instrument during this warranty peri-
od, Bio-Rad Laboratories will repair or replace the defective parts free. The following defects,
however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
For any inquiry or request for repair service, contact Bio-Rad Laboratories after con-
firming the model and serial number of your instrument.
Model
Catalog No.
Date of Delivery
Warranty Period
Serial No.
Invoice No.
Purchase Order No.