4 introduction and startup screens – Bio-Rad PowerPac™ Universal Power Supply User Manual
Page 8
![background image](/manuals/600255/8/background.png)
3.3.2 Direction of Transfer
1. Methods files can be transmitted between a PDA and the PowerPac power
supply.
2. Run data files can be transmitted from the PowerPac power supplies directly to
a PC or to a PDA.
3. Run data files can be transmitted from the PDA to a PC (Figure 3).
Fig. 3. Data files transfer pathway.
3.4 Introduction and Startup Screens
The PowerPac power supply will store and transfer methods and run stored
data file in the temporary memory. The PDA will store and transfer 20 methods and
20 data run files. The PC will only receive run data files. All methods must be
created on the PDA or power supply. Methods cannot be created on the PC. The
PC allows the operator to store run data and methods (Figure 3).
Step
Procedure
Description
1.
Start the software·
•
Click the PowerPac icon on the PDA to
begin.
PowerPac™ Power Supply
Stores one run data file in
volatile memory only.)
PDA
Stores 20 data files
PC
Receives, stores, and
processes run data files
2. Run data files
1. Methods
3. Run data files
5