Bio-Rad GS-800™ Calibrated Densitometer - Manual (Page 11)

11
3. Navigate into the Other Software/GS‐800 Install Me First/MagicScan folder.
4. Run Setup.exe.
5. Install software and reboot computer.
6. Install Quantity One and select the GS‐800 (USB Only) feature, and change it to
“Will be installed on local hard drive”.
7. Finish the Quantity One install.
8. Turn on GS‐800 scanner and connect it to computer.
9. Found new hardware wizard will appear. Select “No, not this time” and press the
next button.