Bio-Rad Bio-Gel P Polyacrylamide Gel - Manual (Page 7)

1. Replace buffer caps with buffer lids prior to
installation into the instrument.
2. For easy identification, buffer caps can be
placed directly above buffer bottle positions.
Guide tubing from the instrument through the
buffer lid while placing bottle into proper position.
3. Shown is proper native IMAC buffer bottle
positioning, with instrument lid in closed position.
Fig. 1. Native IMAC buffer installation procedure.
5
2.
3.
1.
10006044D:4006073B.QXD 11/4/2009 1:28 PM Page 5