Bio-Rad Foresight™ Chromatography Columns, Prepacked - Manual (Page 13)

Technical Support: 1-800-424-6723 • www.bio-rad.com 9
2. Remove excess storage
solution from needle adaptor
inlet
Remove remaining storage
solution in the top part of the
columns by blotting them
upside down on a soft paper
tissue
3. To adjust the Te-Chrom
module operating height,
press and hold the fastener
(C) and move the module to
the required height of the
scale (D)
Note: Make sure that the
columns are positioned as
close as possible to the
collection plate before starting
the experiment
4. Loading the Foresight
RoboColumn units in the
Te-Chrom module
a. Move the locking slider (A)
to the left mechanical stop
b. Load the columns (B)
c. Move the locking slider
(A) to the right mechanical
stop to lock the columns
Note: Make sure that all
columns are securely fixed
into the array plate before
starting the experiment.
A