Bio-Rad Foresight™ Chromatography Columns, Prepacked - Manual (Page 15)

Technical Support: 1-800-424-6723 • www.bio-rad.com 11
d. Configure your process
steps
• Defiine a process
step name such as
Equilibration
• Check the Process
Full Plate option if
appropriate:
i. When checked,
the full array will be
processed
ii. When not checked,
the array is processed
column by column
• Set parameters for
tip washing
• Set individual
chromatographic
parameters
i. Select the liquid
ii. Set the dispensing
volume
iii. Set the required liquid
class for aspiration
iv. Set the required
flow rate (cm/h)
Note: Calculate the
required residence
time (
t) by dividing the
column volume (CV) by
the volumetric flow rate
(
U
v
). t = CV/U
v