BlueAnt V1x Voice Controlled Headset - Manual (Page 14)

BlueAnt
14
VOICE CONTROL – Voice Answer
On an incoming call the headset will announce the Caller ID.
It will then ask you if you want to Answer or Ignore the Call
Say “ANSWER” to accept the call
OR “IGNORE” to reject the call
Note : If the voice recognition in the V1 cannot understand you because of high noise or a loud ringtone coming from the
phone, it will ask you to press the BAB once to answer or twice to Ignore the call.
BUTTON OPERATION
To Turn Voice Control ON or OFF
Press and Hold Vol + and Vol - for 6 Seconds
Pairing
Pairing need only be done once for each device you use. The V1 can store pairing information for up to 8 different Bluetooth
devices. To pair another phone, make sure the fi rst paired phone has Bluetooth switched off or is out of range. If you want
to connect to a previously paired phone, use that phones Bluetooth Menu to connect.
Note: You can say ‘Pair Me’ to enter pair mode at any time, or follow the steps below