BlueAnt V1x Voice Controlled Headset - Manual (Page 3)

ENGLISH
BlueAnt
3
V1 USER GUIDE
Introduction
The revolutionary BlueAnt V1 voice controlled portable headset marks the future of voice controlled Bluetooth devices. Its
voice activated ‘prompt and response’ interface combined with the BlueAnt Voice Isolation Technology™ software, provide
the BlueAnt V1 with high quality and easy to use voice communications. Its dual microphones provide clear and clean voice
input enabling superb Noise Suppression, Echo Cancellation and Wind Noise Reduction.
Your headset is a Bluetooth 2.1 qualifi ed product and supports both the Headset and Handsfree Bluetooth profi les. The V1
can store information and wirelessly interact with up to eight different Bluetooth compliant devices (backward and forward
compatible), including mobile phones, PDA’s, PC’s / Mac’s or any Bluetooth enabled device that supports Headset profi le
or Handsfree profi le. This manual focuses on how to use your headset with your Bluetooth enabled phone.
The V1 can be used in Voice Control or Button Only modes. No voice training is required.
“PAIR ME” “TEACH ME” “WHAT CAN I SAY?” These voice commands get you to everything you need to use the BlueAnt V1.
There are two settings of Voice Isolation - STANDARD and MAX
Voice Isolation Standard is for use in normal environments and gives you a natural sounding voice removing mild noise.
Voice Isolation Max gives you superior voice clarity in a wide variety of high noise areas.