Switch on and off – BlueAnt RIBBON Stereo Bluetooth Streamer User Manual
Page 11
Advertising
11
iPhone users: To use Siri it must be enabled on your phone. Go
to
Settings > General
on your iPhone and check that
Siri
is set
to
ON
. If you have set a passcode lock, you will need to set
Siri
to
ON
in the passcode lock menu.
Android users: Depending on your handset, you may need
to disable the phone password lock to use voice dialing over
Bluetooth. Check your phone manual for further information.
Switch On and Off
To
Do This
Power On
Hold down for about 3 seconds,
until the LED is solid white (red if
the battery charge is low)
Power Off
Hold down for about 3 seconds,
until the LED fl ashes red
Note:
The Ribbon will switch off automatically after 5 minutes
if there is no phone or music source connected.
Advertising