BlueAnt RIBBON Stereo Bluetooth Streamer - Manual (Page 6)

6
Using your Ribbon with a Hi-Fi, Speaker or Dock
To use your Ribbon with your Hi-Fi simply plug one end of
the supplied 3.5mm stereo adaptor cable into the Ribbon
headphone socket and the other end into the AUX port or
3.5mm audio input on your Hi-Fi, speaker or dock. Then, if
required, set your Hi-Fi to use the AUX input.
Tip: There are separate volume controls for the Ribbon, your
phone and your Hi-Fi. For best results turn your Ribbon to
maximum volume and the Hi-Fi to a good listening level.
You can then use your phone to control the music, track and
volume, like a remote control. Make sure the phone volume is
not too low.