BlueAnt RIBBON Stereo Bluetooth Streamer - Manual (Page 4)

4
Charge the Ribbon
The Ribbon has been given an initial partial charge, but for best
results we recommend you fully charge it using the supplied
USB cable and adaptor.
> A full charge takes about 2 hours.
> During charging, the indicator light is solid red.
> When the light goes solid white, the charge is complete.
> The Ribbon features an iPhone battery meter so you can
check your battery status at a glance.
Pair Your Phone or Bluetooth Streaming Device
To get started you need to pair the Ribbon with your phone or
device.
1. Hold down for about 3 seconds until the LED starts
fl ashing to switch the Ribbon on and go straight to pairing
mode.
2. Go to your phone or device’s Bluetooth menu.
3. Select
Pair or Add New Device .
4. Select the BlueAnt Ribbon.
Note: If requested, the pairing code is 0000 (four zeros).