Cooper Instruments & Systems LTL 730 Wireless Tension Link Load Cell - Manual (Page 14)

CF 150 LTL 730 11 12/08
2. Press
COM 2 or COM 1. COM2 is used to configure the optional radio board, if installed.
The following display appears.
3. Select a transmission level using the Sel keys to scroll through the four choices; Disabled (default), RS232,
RS485, and RF. RF stands for Radio Frequency and means transmission would be by radio (requires
optional radio board). Press Enter to accept the setting. If you set the Trans Level to RF, steps 3-5 are
automatically set and do not appear.
The following display appears:
The * indicates which option is currently selected.
The second serial port requires a larger connector. The standard 4-pin connector only has one serial connection
(COM 2).
4. Select a baud rate using the Sel keys to scroll through your choices. Choices are 1200, 2400, 4800, 9600,
19200, 38400, 57600 (default), and 115200. Press Enter to accept the setting.
The following display appears:
5. Select a parity value using the Sel keys to scroll through your choices. Choices are none (default), odd and
even. Press Enter to accept the setting.
The following display appears: