Yealink SIP-T42G - Manual (Page 122)

User Guide for the SIP-T42G IP Phone
112
2. Follow the voice prompt to listen to voice mails.
Note
To view the voice mail via phone user interface:
1. Press Menu->Messages->Voice Mail->View Voice Mail.
The LCD screen displays the amount of new and old voice mails.
2. Select an account and then press the Connect soft key to listen to voice mails.
The SIP-T42G IP phone supports MWI feature when receiving a new voice message. If
someone leaves you a voice mail, you will receive a message waiting indicator. MWI
will be indicated in three ways: a warning tone, an indicator message (including a
voice mail icon) on the LCD screen, and the power indicator LED slow flashes red. This
will be cleared when you retrieve all voice mails or delete them.
The MWI service is unsolicited for some servers, so the SIP-T42G IP phone only handles
the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T42G IP phone must enable subscription for MWI.
Note MWI service is not available on all servers. Contact your system administrator for more
information
.
Before listening to voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will go out.