Yealink SIP-T42G - Manual (Page 60)

User Guide for the SIP-T42G IP Phone
50

DND

Group Listening

Zero Touch

URL

Keypad Lock

Directory
For more information, contact your system administrator.
Account
You can use this key feature to accept the incoming calls, place active calls on hold or
resume a held call. It performs the same as a hard line key.
Dependencies: Type (Account)
Account ID (the account this feature will be applied to)
Value (Default/Lock/Float)
Usage: When receiving an incoming call, the DSS key LED flashes green:
1. Press the DSS key to accept the incoming call.
2. Press the DSS key to place the active call on hold.
3. Press the DSS key again to resume the held call.
If you select Lock from the Value field, the line keys located in the same position of the
other page will be automatically assigned the line key feature with Lock filled in the
Value field. Then you can use this key on every page. This feature is only applicable to
line key 1-3.
If you select Float from the Value field, the phone will automatically switch to the page
the line key located when the line key receives an incoming call.
Speed Dial
You can use this key feature to speed up dialing the numbers often used or hard to
remember.
Dependencies: Type (Speed Dial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the number you want to dial out)
Usage: Press the DSS key to dial out the number specified in the Value field, using the
account selected from the Account ID field.
Voice Mail
You can use this key feature to connect a voice mail quickly. For more information, refer
to
Voice Mail on page 111 .
Dependencies: Type (Key Event)