Yealink SIP-T42G - Manual (Page 64)

User Guide for the SIP-T42G IP Phone
54
the phone.
3. When call forward is in custom mode, press the DSS key to access the custom call
forward interface. You can activate or deactivate call forward for one or all
accounts.
Note
Transfer
You can use this key feature to handle the call differently depending on the transfer
mode via DSS key when there is an active call on the phone.
Dependencies: Type (Key Event)
Key Type (Tran)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
Usage:

When the transfer mode via DSS key is Blind Transfer, press the DSS key to
complete the blind transfer to the number specified in the Value field.

When the transfer mode via DSS key is Attended Transfer, press the DSS key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.

When the transfer mode via DSS key is New Call, press the DSS key to place a new
call to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Usage:
1. Press the DSS key during an active call to place the call on hold.
2. Press the DSS key again to retrieve the held call.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
When leaving the Value field blank, the DSS key performs the same as the Tran soft key
during a call.
If the Value field is left blank, the DSS key performs the same as the Fwd soft key when
receiving an incoming call.
When call forward is activated, the forward key LED will illuminate solid green.