Center control cover, Removing the center control cover, Replacing the center control cover – Dell Inspiron 1545 User Manual

Page 14

Advertising
background image

Back to Contents Page

 

Center Control Cover

Dell™ Inspiron™ 1545 Service Manual 

  

Removing the Center Control Cover

  

Replacing the Center Control Cover


 

 

Removing the Center Control Cover

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the two screws that secure the center control cover to the computer base.

 

3.

Turn the computer top side up, and open the display as far as possible.

 

4.

Ease the center control cover up with a plastic scribe from the back of the computer.

 

5.

Lift the center control cover away from the computer.

 

Replacing the Center Control Cover

 

1.

Align the hooks beneath the center control cover and snap the cover in place.

 

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not 

covered by your warranty.

NOTICE:

Be extremely careful when removing the center control cover. The cover is very fragile.

1

center control cover

Advertising