Push-button ignition switch -6 – NISSAN 2007 Nissan Altima User Manual

Page 220

Advertising
background image

WARNING

Do not operate the push-button ignition

switch while driving the vehicle except

in an emergency. (The engine will stop

when the ignition switch is pushed 3

consecutive times or the ignition switch

is pushed and held for more than 2

seconds.) If the engine stops while the

vehicle is being driven, this could lead

to a crash and serious injury.

When the battery of the Intelligent Key

runs down, insert the Intelligent Key

into the Intelligent Key port until a click

sounds. And then, push the ignition

switch to start the engine.

If the steering lock release malfunction

indicator appears on the vehicle infor-

mation display, push the push-button

ignition switch again while lightly turn-

ing the steering wheel right and left.

See “Vehicle information display” in the

“Instruments and controls” section.

When the ignition switch is pushed without de-

pressing the brake pedal (CVT) or the clutch

pedal (MT), the ignition switch position will illu-

minate as follows:
Push center

● once to change to ACC.
● two times to change to ON.
● three times to return to OFF.

The ignition switch is equipped with an anti-theft

steering lock device.
The ignition lock is designed so that the ignition

switch position cannot be switched to OFF until

the selector lever is moved to the P (Park) posi-

tion (CVT) or N (Neutral) position (MT).
When the ignition switch cannot be pushed to-

ward the OFF position, proceed as follows:

1. Move the selector lever into the P (Park)

position (CVT) or N (Neutral) position (MT).

2. Push the ignition switch. The ignition switch

position will change to the ON position.

3. Push the ignition switch again to the OFF

position.

The selector lever can be moved from the P
(Park) position if the ignition switch is in
the ON position and the brake pedal is
depressed.

In order for the steering wheel to be locked, it

must be turned about 1/8 of a right or left turn

from the straight up position.
To lock the steering wheel, push the igni-
tion switch to the LOCK position. To unlock
the steering wheel, push the ignition switch
while slightly turning the steering wheel
right and left.

If the battery of the vehicle is discharged,
the push-button ignition switch cannot be
turned from the LOCK position.

LSD0181

PUSH-BUTTON IGNITION SWITCH

5-6

Starting and driving

REVIEW COPY—

2007 Altima (alt)

Owners Manual—USA_English (nna)
10/27/06—debbie

Advertising