Towing load/specification -19 towing safety -19 – NISSAN 2007 Nissan Altima User Manual

Page 321

Advertising
background image

TOWING LOAD/SPECIFICATION

TOWING LOAD / SPECIFICATION

UNIT: lb (kg)

MAXIMUM TOWING

LOAD

1,000 (454)

MAXIMUM TONGUE

LOAD

100 (45)

TOWING SAFETY
Trailer hitch

Choose a proper hitch for your vehicle and trailer.

A genuine NISSAN trailer hitch is available from

your NISSAN dealer (Canada only). Make sure

the trailer hitch is securely attached to the ve-

hicle, to help avoid personal injury or property

damage due to sway caused by crosswinds,

rough road surfaces or passing trucks.

Hitch ball

Choose a hitch ball of the proper size and weight

rating for your trailer:

● The required hitch ball size is stamped on

most trailer couplers. Most hitch balls also

have the size printed on the top of the ball.

● Choose the proper class hitch ball based on

the trailer weight.

● The diameter of the threaded shank of the

hitch ball must be matched to the ball mount

hole diameter. The hitch ball shank should

be no more than 1/16” smaller than the hole

in the ball mount.

● The threaded shank of the hitch ball must be

long enough to be properly secured to the

ball mount. There should be at least 2

threads showing beyond the lock washer

and nut.

Class I hitch

Class I trailer hitch equipment (receiver, ball

mount and hitch ball) can be used to tow trailers

of a maximum weight of 2,000 lb (909 kg).
You may add Class I trailer hitch equipment that

has a 2,000 lb (909 kg) maximum weight rating to

the vehicle, but your vehicle is only capable of

towing the maximum trailer weights shown in the

Towing Load/Specification Chart earlier in this

section.

CAUTION

Do not use axle-mounted hitches.

The hitch should not be attached to or

affect the operation of the impact-

absorbing bumper.

Do not modify the vehicle exhaust sys-

tem, brake system, etc. to install a

trailer hitch.

To reduce the possibility of additional

damage if your vehicle is struck from

the rear, where practical, remove the

hitch and/or receiver when not in use.

After the hitch is removed, seal the bolt

holes to prevent exhaust fumes, water

or dust from entering the passenger

compartment.

Regularly check that all trailer hitch

mounting bolts are securely mounted.

Tire pressures

● When towing a trailer, inflate the ve-

hicle tires to the recommended cold

tire pressure indicated on the Tire

and Loading Information label.

● Trailer tire condition, size, load rating

and proper inflation pressure should

be in accordance with the trailer and

tire manufacturer’s specifications.

Technical and consumer information

9-19

REVIEW COPY—

2007 Altima (alt)

Owners Manual—USA_English (nna)
10/27/06—debbie

Advertising